Installing the keyboard
1. Place the keyboard into the slot on the computer.
2. Tighten the screws to secure the keyboard to the computer.
3. Connect the keyboard backlight cable and keyboard cable to the connectors on the system board.
4. Place the keyboard shield over to secure the keyboard.
5. Tighten the screws to secure the keyboard shield to the keyboard.
6. Connect the speaker cable and replace the speaker to the computer.
7. Install the:
a. system board
b. display assembly
c. power connector port
d. I/O board
e. heatsink
f. system fan
g. WLAN card
h. coin cell battery
i. SSD card
j. battery
k. base cover
52
To Next Page
Loading...
