Installing the camera
1. Connect the camera cable to the connector on the camera module.
2. Place the camera module into the slot on the display panel.
3. Install the:
a. display cover
b. display assembly
c. battery
d. base cover
4. Follow the procedure in After working inside your computer.
System board
Removing the system board
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. base cover
b. battery
c. SSD card
d. coin cell battery
e. WLAN card
f. system fan
3. Peel the adhesive tapes that secure the following cables:
a. I/O board [1]
b. display [2]
c. touch screen
46
To Next Page
Loading...
