Installing the display assembly
1. Place the display assembly to align it with the screw holders on the computer chassis.
2. Tighten the screw to secure the display assembly to the computer chassis.
3. Close the display and turn the computer over.
4. Connect the display and touch screen board cables to the connectors on the system board.
5. Affix the adhesive tapes to secure the display and touch screen board cables.
6. Install the:
a. WLAN card
b. battery
c. base cover
7. Follow the procedure in After working inside your computer.
Display cover
Removing the display cover
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. base cover
b. battery
39
To Next Page
Loading...
