Display hinges
Removing the display hinges
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. base cover
b. battery
c. display assembly
d. display cover
e. sensor board
3. To remove the display hinges:
a. Remove the screws that secure the display hinges to the display panel [1].
b. Lift the display hinges away from the display panel [2].
c. Release the display cable that routes under the display hinge [3].
Installing the display hinges
1. Route the display cable to the display hinge.
2. Place the display hinges on both sides of the display panel.
3. Tighten the screws to secure the display hinges to the display panel.
4. Install the:
a. sensor board
44
To Next Page
Loading...
