Installing the heatsink
1. Place the heatsink on the system board.
2. Tighten the screws to secure the heatsink to the computer.
3. Install the:
a. battery
b. base cover
4. Follow the procedure in After working inside your computer.
LED board
Removing the LED board
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. base cover
b. battery
3. To release the LED board:
a. Peel the adhesive tapes to access the speaker cable [1].
b. Release the speaker cable from the computer [2].
28
To Next Page
Loading...
