c. display assembly
3. To remove the display cover:
a. Using a plastic scribe, pry the display cover from the edges to release it from the display assembly
[1].
b. Lift the display cover away from the display assembly [2].
c. Release the display cable and touch screen board cable from under the display hinge [3].
Installing the display cover
1. Route the display cable and touch screen board cable to the display hinge.
2. Place the display cover on the display assembly and press along the edges to secure it.
3. Install the:
a. display assembly
b. battery
c. base cover
4. Follow the procedure in After working inside your computer.
40
To Next Page
Loading...
