Option Description
• Disabled
• Reboot bypass
Default setting: Disabled
Password Change Allows you to enable the disable permission to the System and Hard Drive
passwords when the admin password is set.
Default setting: Allow Non-Admin Password Changes is selected.
UEFI Capsule
Firmware Updates
Allows you to control whether the system allows BIOS updates through UEFI
capsule update packages.
Default setting: Enable UEFI Capsule Firmware Updates is selected.
PTT Security Allows you to control whether the Platform Trust Technology (PTT) feature is
visible to the operating system. The options are:
• PTT On
• Clear
Default setting: PTT On is selected.
NOTE: Disabling this option does not change any settings made to the PTT,
delete, or change any information or keys stored in the PTT. Changes made to
this setting take effect immediately.
Computrace Allows you to activate or disable the optional Computrace software The options
are:
• Deactivate
• Disable
• Activate
NOTE: The Activate and Disable options will permanently activate or disable
the feature and no further changes will be allowed
Default setting: Deactivate
CPU XD Support Allows you to enable the Execute Disable mode of the processor.
Enable CPU XD Support (default)
Admin Setup
Lockout
Allows you to prevent users from entering the setup when an Administrator
password is set.
Default Setting: Enable Admin Setup Lockout is not selected.
72
To Next Page
Loading...
