Disassembly and reassembly
Recommended tools
The procedures in this document require the following tools:
● Phillips #0 screwdriver
● Phillips #1 screwdriver
● Plastic scribe
NOTE: The #0 screw driver is for screws 0-1 and the #1 screw driver is for screws 2-4
Screw size list
Table 1. Screw size list
Component M2x2 M2x3 M2x4 M2.5x2.5 M2.5x5 M2x5.5 M3x3 2.0D 0.8+2.2L K
Hinge Bracket L + R to LCD cover 10
LCD panel 4
TP Dome support bracket to palmrest 2
Touchpad panel 4
Heatsink 3
Type-C bracket to System board 1
HDD bracket to HDD Module 4
Dc-IN to palmrest 1
System board to palmrest 1
Power board to palmrest 1
VGA board to palmrest 2
WWAN board to palmrest 1
SD reader and coin cell battery holder 2
Hinge bracket L + R to palmrest 5
HDD bracket to palmrest 4
FAN to palmrest 2
2
Disassembly and reassembly 11
To Next Page
Loading...
