Table 7. Qualcomm QCA61x4A 802.11ac MU-MIMO Dual Band (2x2) Wi-Fi + Bluetooth 4.1 LE M.2 Wireless
Card (continued)
Attribute Specification
Bluetooth Operating Frequency Bands
2.4GHz
Transmission FHSS (Frequency Hopping Spread Spectrum)
Bluetooth Data Encryption
128-bit encryption
Bluetooth Receive Sensitivity
‐70dBm@BER≤0.01% (EDR)
-100dBm@BER≤30.8% (LE nominal)
Temperature
Operating temperature -10° to +65° C
Storage temperature of –45° to +70° C
Humidity Up to 90%
Table 8. Intel® Dual Band Wireless-AC 8265 802.11AC 2x2 Wi-Fi + BT 4.2 LE M.2 Wireless Card
Attribute Specification
Host interface
M.2 2230 form factor (WiFi– PCIe, Bluetooth – USB)
Network standard
IEEE 802.11a/b/g/n/ac MU-MIMO RX
Wi-Fi Alliance Certifications
802.11a/b/g/n/ac, WPA, WPA2, WMM, WPS, Wi-Fi Direct
Operating Frequency Bands
2.4 GHz and 5 GHz
Dual Stream N Support for two transmit and receive antennas enable better
wireless at the same distance when compared to older
802.11a/b/g solutions.
Data Rate
Up to 867 Mbps
Power Consumption Optimized power modes (sleep states) reduce power
consumption during periods of inactivity
Authentication
Authentication Protocols
Encryption
Product Safety
WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-
FAST), EAP-SIM, EAP-AKA
PAP, CHAP, TLS, GTC, MS-CHAP, MS-CHAPv2
64-bit and 128-bit WEP, 128-bit AES-CCMP
UL, C-UL, CB (IEC60950-1)
Management Capabilities Alerting Support for Intel® AMT 11.x on KabyLake
Government Compliance FIPS, FISMA
Client Utility Intel PRO/Set Wireless Software v19.0 and later.
Radio On/Off Supported
Roaming Supports seamless roaming between respective access points
(802.11b, 802.11g, 802.11a/b/g, and 802.11a/b/g/n/ac)
Wake On Wireless Supported
Wireless Display Native Miracast support by Windows 8.1 and 10
Wireless PAN Standard Dual Mode Bluetooth 4.2, BLE (HW ready, SW depends on
OS, Windows 10 supports up to Bluetooth 4.1)
Bluetooth Data rates 2.4GHz
64 Technical specifications
To Next Page
Loading...
