Next steps
1. Install the battery.
2. Install the base cover.
3. Install the microSD card.
4. Follow the procedure in After working on your computer.
Gelijkspanningsingangspoort
Removing the DC-in port
Prerequisites
1. Follow the procedure in before working with your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
Steps
1. Remove the two (M2x4) and (M2x5) screws that secure the Type-C bracket to the system board [1]. Lift the Type-C bracket away
from the computer [2].
30
Onderdelen verwijderen en plaatsen
To Next Page
Loading...
