Install
inner frame 1
Next steps
1. Install the coin cell battery.
2. Install the DC-in.
3. Install the memory module.
4. Install the WLAN.
5. Install the WWAN.
6. Install the battery.
7. Install the base cover.
8. Install the microSD card.
9. Follow the procedure in After working on your computer.
Touchpadknoppen
Removing the touchpad button board
Prerequisites
1. Follow the procedure in before working with your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the WWAN.
6. Remove the WLAN.
7. Remove the memory module.
8. Remove the DC-in port.
9. Remove the Coin cell battery.
42
Onderdelen verwijderen en plaatsen
To Next Page
Loading...
