Next steps
1. Install the System fan.
2. Install the Heatsink.
3. Install the Inner frame.
4. Install the coin cell battery.
5. Install the DC-in.
6. Install the memory module.
7. Install the WLAN.
8. Install the WWAN.
9. Install the battery.
10. Install the base cover.
11. Install the microSD card.
12. Follow the procedure in After working on your computer.
Toetsenbord
Removing the keyboard
Prerequisites
1. Follow the procedure in before working with your computer.
2. Remove the microSD card.
Onderdelen verwijderen en plaatsen
67
To Next Page
Loading...
