3. Remove the base cover.
4. Remove the battery.
5. Remove the WWAN.
6. Remove the WLAN.
7. Remove the memory module.
8. Remove the DC-in port.
9. Remove the Coin cell battery.
Steps
1. Lift the latch and disconnect the backlit cable and the keyboard cable from the connectors on the touchpad.
2. Remove the M2x2.5 screws that secure the keyboard to the palmrest [1].
3. Remove the keyboard away from the computer [2]. The touchpad FFC covers one of the screws that secure the keyboard assembly
to the palmrest.
68
Onderdelen verwijderen en plaatsen
To Next Page
Loading...
