11. Remove the heatsink.
12. Remove the system fan.
13. Remove the speaker.
14. Remove the LED board.
15. Remove the system board.
16. Remove the keyboard.
Steps
1. Remove the two (M2x3) screws that secure the power button with the fingerprint reader on the palmrest [1].
2. Lift the power button with fingerprint reader board off the palmrest [2].
Installing the power button
Steps
1. Place the power button with fingerprint reader on the palmrest [1].
2. Replace the two (M2x3) screws that secure the power button with fingerprint reader on the palmrest [2].
Onderdelen verwijderen en plaatsen
73
To Next Page
Loading...
