Next steps
1. Install the DC-in.
2. Install the heatsink-discrete or heatsink-UMA.
3. Install the LED board.
4. Install the inner frame.
5. Install the memory.
6. Install the WLAN card.
7. Install the WWAN card.
8. Install the 2280 SATA SSD.
9. Install the battery.
10. Install the base cover.
11. Follow the procedure in After working inside your computer.
Keyboard
Removing the keyboard
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
4. Remove the 2280 SATA SSD.
5. Remove the memory.
6. Remove the WLAN card.
7. Remove the WWAN card.
8. Remove the inner frame.
9. Remove the LED board.
10. Remove the DC-in.
11. Remove the system board.
NOTE:
System board can be removed with heatsink attached.
About this task
The figure indicates the location of the keyboard and provides a visual representation of the removal procedure.
Disassembly and reassembly
61
To Next Page
Loading...
