Installing the hinge caps
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the hinge caps and provides a visual representation of the installation procedure.
Steps
1. Place the hinge caps and slide outward on the display hinges.
2. Replace the two (M2x3) screws to secure the hinge caps to the display hinge.
Next steps
1. Install the display bezel.
2. Install the display assembly.
3. Install the battery.
4. Install the base cover.
5. Follow the procedure in After working inside your computer.
Disassembly and reassembly
77
To Next Page
Loading...
