Dell Latitude 5401 - Display (Edp) Cable; Removing Display Cable

Steps
1. Place the display hinge on the display assembly.
2. Replace the four (M2.5x3) screws to secure the display hinge to the display assembly.
Next steps
1. Install the display panel.
2. Install the display hinge caps.
3. Install the display bezel.
4. Install the display assembly.
5. Install the battery.
6. Install the base cover.
7. Follow the procedure in After working inside your computer.
Display (eDP) cable
Removing display cable
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
86
Disassembly and reassembly