Steps
1. Adhere the display cable to the display back cover.
2. Adhere the conductive tape and route the display cable to the display back cover.
Next steps
1. Install the camera.
2. Install the display panel.
3. Install the display hinge caps.
4. Install the display bezel.
5. Install the display assembly.
6. Install the battery.
7. Install the base cover.
8. Follow the procedure in After working inside your computer.
Display back cover assembly
Replacing the display back cover
Prerequisites
1. Follow the procedure in Before working inside your computer.
88
Disassembly and reassembly
To Next Page
Loading...
