b) keyboard backlit cable
c) touchpad cable
d) touchpad button board cable
3. Remove the eighteen (M2x2.5) screws that secure the keyboard assembly to the palmrerst.
4. Carefully lift the keyboard assembly from the palmrest.
5. Flip the keyboard assembly.
6. Remove the six (M2x2) screws that secures the keyboard to the keyboard bracket.
7. Remove the keyboard from the keyboard bracket.
Installing the keyboard
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the keyboard and provides a visual representation of the installation procedure.
Disassembly and reassembly 63
To Next Page
Loading...
