EasyManua.ls Logo

Dell Latitude E6440 - Removing the Coin-Cell Battery; Installing the Coin-Cell Battery; Removing the Heatsink Assembly

Dell Latitude E6440
69 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6. Install:
a. base corner cap (left)
b. base cover
c. battery
7. Follow the procedures in
After Working Inside Your Computer
.
Removing the Coin-Cell Battery
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a. battery
b. base cover
3. Disconnect the coin-cell battery cable, pry the coin-cell battery upward and remove it from the computer.
Installing the Coin-Cell Battery
1. Place the coin-cell battery in its slot.
2. Connect the coin-cell battery cable to the system board.
3. Install:
a. base cover
b. battery
4. Follow the procedures in
After Working Inside Your Computer
.
Removing the Heatsink Assembly
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a. battery
b. base cover
24

Table of Contents

Other manuals for Dell Latitude E6440

Related product manuals