Dell Latitude E6440 - Removing the Expresscard Cage

3. Connect the following cables:
a. media board
b. Unified Security Hub (USH) board
c. touchpad
d. Wi-Fi board
e. LED board
4. Flip the computer and tighten the screws to secure the palmrest assembly to the base of the computer.
5. Install:
a. base corner caps
b. base cover
c. display-hinge cover
d. optical drive
e. hard drive
f. keyboard
g. keyboard trim
h. battery
i. ExpressCard
j. SD card
6. Follow the procedures in After Working Inside Your Computer .
Removing the ExpressCard Cage
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove:
a. SD Card
b. ExpressCard
c. battery
d. keyboard trim
e. keyboard
f. hard drive
g. optical drive
h. display-hinge cover
i. base cover
j. base corner caps
k. palmrest assembly
31