Option Description
Extend BIOS POST Time Allows you to create an additional pre-boot delay. The options are:
• 0 seconds (Default Setting)
• 5 seconds
• 10 seconds
MEBx Hotkey Allows you to enable the MEBx hotkey function if required. The options is enabled
by default.
Table 10. Virtualization Support
Option Description
Virtualization This option specifies whether a Virtual Machine Monitor (VMM) can utilize the
additional hardware capabilities provided by Intel Virtualization technology.
• Enable Intel Virtualization Technology - Default Setting.
Table 11. Wireless
Option Description
Wireless Switch Allows you to determine which wireless device can be controlled by the wireless
switch. The options are:
• WWAN
• WiGig
• WLAN
• Bluetooth
All options are enabled by default.
Wireless Device Enable Allows you to enable or disable the wireless devices. The options are:
• WWAN
• Bluetooth
• WLAN/WiGig
All options are enabled by default.
Table 12. Maintenance
Option Description
Service Tag Displays the service tag of your computer.
Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This
option is not set by default.
Table 13. System Logs
Option Description
BIOS events Displays the system event log and allows you to clear the log.
Thermal Events Displays the thermal events and allows you to clear the log.
Power Events Displays the power events and allows you to clear the log.
58
To Next Page
Loading...
