Installing optical drive
1 Insert the optical drive into the optical drive bay until it clicks into place.
2 Open the Front panel door.
3 Route the data cable and power cable under the drive cage.
4 Connect the data cable and power cable to the connectors on the optical drive.
5 Close the front panel door.
6 Install the:
a Front bezel
b Back cover
7 Follow the procedure in After working inside your computer.
M.2 PCIe SSD
Removing optional M.2 PCIe SSD
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a Back cover
b Front bezel
22
Disassembly and reassembly
To Next Page
Loading...
