Dell OptiPlex 7050 Small Form Factor User Manual

Installing the cover
1. Place the cover on the computer and slide the cover until it clicks into place.
2. Follow the procedure in After working inside your computer
Expansion card
Removing expansion card
NOTE: Depending on the configuration you order, you may see either of the heat sinks as shown in the image below.
1. Follow the procedure in Before working inside your computer.
2. Remove the cover.
3. Pull the metal tab to open the expansion card latch.
10
Disassembly and reassembly

Dell OptiPlex 7050 Small Form Factor Specifications

General

Brand	Dell
Model	OptiPlex 7050 Small Form Factor
Category	Desktop
Language	English