4. Follow the procedure in After working inside your computer.
System board
Removing system board
NOTE: Depending on the configuration you order, you may see either of the heat sinks as shown in the image below.
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. cover
b. bezel
c. 2.5–inch drive assembly
d. optical drive
e. heat sink
f. processor
g. expansion card
h. memory module
i. M.2 PCIe SSD
j. SD card reader
3. To remove the I/O panel:
a. Remove the screw that secures the I/O panel [1].
b. Slide and push toward the front from the computer [2].
Disassembly and reassembly
33
To Next Page
Loading...
Need help?
General