Installing the wireless card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the wireless card and provide a visual representation of the installation procedure.
Figure 32. Installing the wireless card
Steps
1. Connect the wireless-antenna cables to the wireless card.
Table 27.
Antenna-cable color scheme
Connectors on the
wireless card
Antenna-cable color Silkscreen marking
Main White MAIN △ (white triangle)
Auxiliary Black AUX ▲ (black triangle)
2. Align and place the wireless-card bracket over the antenna cables to secure them.
Removing and installing Customer Replaceable Units (CRUs)
57
To Next Page
Loading...
