EasyManua.ls Logo

Dell OptiPlex Tower 7020 - Page 9

Dell OptiPlex Tower 7020
141 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NOTE: The maximum resolution that is supported is up to 4096 x 2304 @ 60 Hz.
3. Two USB 3.2 Gen 1 (5 Gbps) ports
Connect devices such as external storage devices and printers. Provides data transfer speeds of up to 5 Gbps.
4. Two USB 2.0 (480 Mbps) with SmartPower On ports
Connect devices such as external storage devices and printers. Provides data transfer speeds of up to 480 Mbps.
NOTE: When USB wake is enabled in the BIOS the system will power on or wake from hibernation when a USB mouse
or keyboard that is connected to this port is used.
5.
Three expansion card slots
Connect a PCI-Express card such as graphics, audio, or network card to enhance the capabilities of your system.
6. Power-cord connector port
Connect a power cable to provide power to your system.
7. Power-supply diagnostic light
Indicates the power-supply state.
8. Security-cable slot (for Kensington locks)
Connect a security cable to prevent unauthorized movement of your system.
9. External puck antenna (optional)
Connect an external puck antenna.
10. Network port
Connect an Ethernet (RJ45) cable from a router or a broadband modem for network or Internet access.
11. Service Tag label
The Service Tag is a unique alphanumeric identifier that enables Dell service technicians to identify the hardware
components in your system and access warranty information.
12. Padlock ring
Attach a standard padlock to prevent unauthorized access to the interior of your system.
13. Serial port (optional)
Connect serial I/O devices.
14. Video port (HDMI 2.1/DisplayPort 1.4a (HBR3 support)/VGA) (optional)
The port available at this location may vary depending on the optional I/O card installed on your computer.
HDMI 2.1 port
Connect to a TV, external display or another HDMI-in enabled device. Maximum resolution supported up to 4096 x 2160
@ 60 Hz.
DisplayPort 1.4a (HBR3 support)
Connect an external display or a projector. Maximum resolution supported up to 5120 x 3200 @ 60 Hz.
VGA port
Connect an external display or a projector. Maximum resolution supported up to 1920 x 1200 @ 60 Hz.
Views of OptiPlex Tower 7020
9

Table of Contents

Related product manuals