Configuring System Information 125
Add a Log Server Page
In addition to the fields in the Remote Logs Server Settings page, the Add a Log Server
page contains the following field:
• New Log Server IP Address—Specifies the IP address of the new Log Server.
To add a log server:
1 Define the New Log Server IP Address, UDP Port, Facility, and Description fields,
and select the Severity to Include check boxes.
2 Click Apply Changes. The server is defined and added to the Available Servers list.
Displaying the Log Servers Table:
1 Open the Remote Logs Server Settings page.
2 Click Show All. The Log Servers Table page opens.
Log Servers Table Page
To Next Page
Loading...
