70 Configuring the PowerConnect 3324/3348 Switch
www.dell.com | support.dell.com
4 Select Use the following IP address option.
5 In the Internet Protocol (TCP/IP) properties windows define statically (not via
DHCP) an IP address, Mask and default gateway for the PC.
NOTE: If the PC is connected to a router and not directly to PowerConnect 3324/3348 device,
the default gateway must be configured as the IP address of the router interface connected to the
PC (which leads to the PowerConnect device).
Telnet access
Use windows/DOS command line or a telnet application to access the device via a telnet.
Remember to enter the appropriate password. The connection is done with the IP address
defined on the device.
To Next Page
Loading...
