256 Configuring Switch Information
www.dell.com | support.dell.com
• Defining VLAN LAG Settings
• Configuring GVRP
Defining VLAN Members
The VLAN Membership page allows network managers to define VLAN groups. To open
the VLAN Membership page:
• Click Switch > VLAN > VLAN Membership in the Tree View. The VLAN
Membership page opens.
VLAN Membership Page
The VLAN Membership page is divided into the following sections:
• VLAN Membership Section
• VLAN Port Membership Table
• Defining VLAN LAG Settings
VLAN Membership Section
The VLAN Membership Section contains parameters for assigning VLAN membership to
ports. PowerConnect 3324/3348 supports up to 256 VLANs.
NOTE: All ports must have a defined PVID. If no other value is configured, use the default
VLAN PVID.
To Next Page
Loading...
