130 Configuring System Information
www.dell.com | support.dell.com
The following is an example of the CLI commands:
Console (config)# ip default-gateway 196.210.10.1
Console (config)# no ip default-gateway 196.210.10.1
Defining IP Interfaces
The IP Interface Parameters page contains parameters for assigning IP addresses to
interfaces. To open the IP Interface Parameters page:
• Click System > IP Addressing > IP Interface Parameters in the Tree View. The IP
Interface Parameters page opens.
IP Interface Parameters Page
The IP Interface Parameters page contains the following fields:
• IP Address—Indicates the list of interface IP address.
• Interface—Specifies the interface type for which the selected IP address is defined.
The possible field values are:
no ip default-gateway [ip-address] Removes a default gateway.
CLI Command Description
To Next Page
Loading...
