300 Viewing Statistics
www.dell.com | support.dell.com
• Transmitted Broadcast Packets—Displays the amount of Broadcast packets
transmitted from the selected interface.
• Transmitted Unknown Packets—Displays the amount of unknown packets
transmitted from the selected interface.
• Transmitted Discarded Packets—Displays the amount of discarded packets from the
selected interface during transmission.
• Transmitted Packets with Errors—Displays the amount of packets found to have
errors during transmission from the selected interface.
Displaying interface statistics for a port:
1 Open the Interface Statistics page.
2 Select Port in the Interface field.
3 Click Reset All Counters. The port interface statistics are displayed.
Displaying interface statistics for a LAG:
1 Open the Interface Statistics page.
2 Select LAG in the Interface field.
3 Click Reset All Counters. The LAG interface statistics are displayed.
Viewing Interface Statistics Using the CLI Commands
This section contains the CLI commands for viewing interface statistics.
The following is an example of the CLI commands:
console# show interfaces counters ethernet 1/e1
PortInOctetsInUcastPktsInMcastPktsInBcastPkts
-----------------------------------------------
1/e11717032626
CLI Command Description
show interfaces counters [ethernet
interface | port-channel port-
channel-number]
Displays traffic seen by a physical
interface.
To Next Page
Loading...
