Configuring Switch Information 235
The following is an example of the CLI commands:
Console (config)# bridge aging-time 250
Console (config)# exit
Console# show bridge address table
Aging time is 250 sec
vlan mac address port type
---- -------------- ----- -----
1 0060.704C.73FF 5/e8 dynamic
1 0060.708C.73FF 5/e8 dynamic
200 0010.0D48.37FF 5/e9 static
Configuring GARP
Generic Attribute Registration Protocol (GARP) protocol is a general-purpose protocol that
registers any network connectivity or membership-style information. GARP defines a set of
devices interested in a given network attribute, such as VLAN or multicast address. To open
the GARP page:
•Click Switch > GARP in the Tree View. The GARP page opens.
show bridge address-table [vlan
vlan] [ethernet interface |
port-channel port-channel-
number]
Displays classes of dynamically created
entries in the bridge-forwarding database.
CLI Command Description
To Next Page
Loading...
