Dell PowerConnect 3324 - Enabling IGMP Snooping

Configuring Switch Information 289
The following is an example of the CLI commands:
Console # show bridge multicast filtering
Filtering: Enabled
VLAN: 1
PortForward-All
StaticStatus
---------------------
1/e1ForbiddenFilter
1/e2ForwardForward(s)
1/e3-Forward(s)
Enabling IGMP Snooping
The IGMP Snooping page allows network managers to add IGMP members. To open the
IGMP Snooping page:
•Click Switch > Multicast Support > IGMP Snooping in the Tree View. The IGMP
Snooping page opens.
CLI Command Description
show bridge multicast
filtering vlan-id
Displays the multicast configuration.
bridge multicast
forbidden forward-all
Disables forwarding multicast packets on a port.
bridge multicast forward-
all {add | remove}
{ethernet interface-list |
port-channel port-
channel-number-list}
Enables forwarding of all multicast packets on a
port.