Configuring System Information 175
The following is an example of the CLI commands:
Console (config)# snmp-server enable traps
Console (config)# snmp-server trap authentication
Console (config)# snmp-server host 10.1.1.1 trapRec 2
Console (config)# exit
Console# show snmp
Community-StringCommunity-AccessIP address
-------------------------------------------
publicread onlyAll
privateread write172.16.1.1
privateread write172.17.1.1
Traps are enabled.
Authentication trap is enabled.
Trap-Rec-AddressTrap-Rec-CommunityVersion
------------------------------------------
192.122.173.42public2
System Contact: Robert
System Location: Marketing
Managing Files
The File Management page device allows network managers to manage device software, the
Image Files, and the Configuration Files. Files can be downloaded from a TFTP server.
show snmp Displays the SNMP communications
status.
CLI Command Description
To Next Page
Loading...
