350 Configuring Quality of Service
www.dell.com | support.dell.com
The following is an example of the CLI commands:
Console (config)# qos map dscp-queue 33 40 41 to 1
Mapping TCP Port Values to Queues
The TCP to Queue page allows network managers to classify specific TCP destination port
traffic to queues. To open the TCP to Queue page:
• Select Quality of Service >Mapping to Queue > TCP to Queue in the Tree View.
The TCP to Queue page opens.
TCP to Queue Page
The TCP to Queue page contains the following information:
• Select TCP Port from List—Provides a drop-down list of predefined commonly used
TCP ports.
CLI Command Description
qos map dscp-queue dscp-
list to queue-id
Modifies the DSCP to queue mapping.
To Next Page
Loading...
