274 Configuring Switch Information
www.dell.com | support.dell.com
Link Aggregation Page
This section includes the following topics:
• Defining LACP Parameters
• Defining LAG Membership
Defining LACP Parameters
The LACP Parameters page contains information for configuring LACP LAGs. Aggregate
ports can be linked into link-aggregation port-groups. Each group is comprised of ports with
the same speed.
Aggregated links can be manually set up or automatically established by enabling the Link
Aggregation Control Protocol (LACP) on the relevant links. To open the LACP Parameters
page:
• Click Switch > Link Aggregation > LACP Parameters in the Tree View. The LACP
Parameters page opens.
To Next Page
Loading...
