Dell PowerConnect 3324 - Page 147

Configuring System Information 147
The following is an example of the CLI commands:
Console (config)# management access-list mlist
Console (config-macl)# permit ethernet 1/e1
Console (config-macl)# permit ethernet 2/e9
Console (config-macl)# deny ethernet 1/e2
Console (config-macl)# deny ethernet 2/e10
Console (config-macl)# exit
CLI Command Description
management access-list name Defines an access-list for management,
and enters the access-list context for
configuration.
permit [ethernet interface-
number | vlan vlan-id | port-
channel number] [service
service]
Sets port permitting conditions for the
management access list.
permit ip-source ip-address
[mask mask | prefix-length]
[ethernet interface-number |
vlan vlan-id | port-channel
number] [service service]
Sets port permitting conditions for the
management access list, and the
selected management method.
deny [ethernet interface-
number | vlan vlan-id | port-
channel number] [service
service]
Sets port denying conditions for the
management access list, and the
selected management method.
deny ip-source ip-address
[mask mask | prefix-length]
[ethernet interface-number |
vlan vlan-id | port-channel
number] [service service]
Sets port denying conditions for the
management access list, and the
selected management method.
management access-class {console-
only | name}
Defines which access-list is used as the
active management connections.
show management access-list
[name]
Displays the active management access-
lists.
show management access-class Displays information about
management access-class.