Configuring System Information 159
Local User Table Page
Deleting Users:
1 Open the Local User Database page.
2 Click Show All. The Local User Table page opens.
3 Select a User Name.
4 Check the Remove check box.
5 Click Apply Changes. The user is deleted, and the device is updated.
Assigning Users Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed
in the Local User Database page.
The following is an example of the CLI commands:
Console (config)# username bob password lee privilege 15
CLI Command Description
username name [password
password] [privilege
level] [encrypted]
Establishes a username-based authentication
system.
To Next Page
Loading...
