162 Configuring System Information
www.dell.com | support.dell.com
• Click System > Management Security > Enable Passwords in the Tree View. The
Modify Enable Password page opens.
Modify Enable Password Page
The Modify Enable Password page contains the following fields:
• Select Enable Access Level—Specifies the access level associated with the Enable
password.
• Password—Indicates the Enable password.The password is displayed as
*******.
• Confirm Password—Confirms the new Enable password. The confirmed password is
displayed as
*******.
Defining a new Enable Password:
1 Open the Modify Enable Password page.
2 Define the Select Enable Access Level, Password, and Confirm Password fields.
3 Click Apply Changes. The new Enable password is defined, and the device is updated.
Assigning Enable Passwords Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed
in the Modify Enable Password page.
To Next Page
Loading...
