Configuring Switch Information 269
GVRP Parameters Page
The GVRP Parameters page contains the following fields:
• GVRP Global Status—Enables GVRP on the device. The possible field values are:
– Enabled—Indicates GVRP is enabled on the device.
– Disabled—Indicates GVRP is disabled on the device. This field value is the
default.
• Interface—Indicates the specific interface for which GVRP is enabled. The possible
field values are:
– Port—Indicates the specific port for which GVRP is enabled.
– LAG—Indicates the specific LAG for which GVRP is enabled.
• GVRP State—Indicates if GVRP is enabled on a port. The possible field values are:
– Enable—Enables GVRP on the interface.
– Disable—Disables GVRP on the interface. This is the default value.
• Dynamic VLAN Creation—Enables VLAN creation through GVRP. The possible field
values are:
– Enable—Enables creating VLANs through GVRP.
To Next Page
Loading...
