Viewing Statistics 319
RMON Events Table
Deleting multiple RMON Event entries:
1 Open the RMON Events Control page.
2 Select an Event Table entry in the Event Index field.
3 Check the Remove check box.
4 Click Apply Changes. The Event Table entry is deleted, and the device is updated.
NOTE: A single Event entry can be removed from the RMON Events page using the Remove
check box.
Defining and Displaying RMON Events Control Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring and
displaying fields in the RMON Events Control page.
The following is an example of the CLI commands:
Console (config)# rmon event 10 log
Config (config)# exit
Console# show rmon events
IndexDescriptionTypeCommunityOwnerLast time sent
---------------------------------------------------
CLI Command Description
rmon event index type
[community text] [description
text] [owner name]
Configures a RMON event.
show rmon events Displays the RMON event table.
To Next Page
Loading...
