Viewing Statistics 325
RMON Alarm Table
Deleting an Alarm Table entry:
1 Open the RMON Alarm page.
2 Select an RMON Alarm in the Alarm Entry drop-down box.
3 Check the Remove check box.
4 Click Apply Changes. The RMON Alarm Table entry is deleted, and the device is
updated.
Defining and Displaying Device Alarms Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring and
displaying fields in the RMON Alarm page.
The following is an example of the CLI command:
Console (config)# rmon alarm 1.3.6.1.2.1.2.2.1.10 1000000 10 20
Console (config)# exit
Console# show rmon alarm-table
IndexOIDOwner
-----------------------------------
11.3.6.1.2.1.2.2.1.10.1CLI
21.3.6.1.2.1.2.2.1.10.1Manager
CLI Command Description
rmon alarm index variable interval
rthreshold fthreshold revent
fevent [type type] [startup direction]
[owner name]
Configures alarm conditions.
show rmon alarm-table Displays the alarm summary table.
show rmon alarm number Displays alarm configurations.
To Next Page
Loading...
