344 Configuring Quality of Service
www.dell.com | support.dell.com
Queue Setting Page
The Queue Settings page contains the following fields:
• Queues—Indicates the queue number.
NOTE: Overloading a queue may cause network congestion.
• Strict Priority—Specifies if traffic scheduling is based strictly on the queue priority.
The default is enabled.
• WRR—Specifies if traffic scheduling for the queue is based on the WRR scheme.
• WRR Weight—Assigns WRR weights to egress queues. The possible field values are
1–255, where 1 is the lowest value and 255 is the highest value.
• % of WRR Bandwidth—Indicates the amount of bandwidth assigned to the WRR.
Defining the Queue Settings:
1 Open the Queue Settings page.
2 Define Scheduling, WRR Weight, and Bandwidth fields.
3 Click Apply Changes. The Queue Settings page and the device are updated.
To Next Page
Loading...
