Dell POWERCONNECT 5548P - Proprietary Protocol Filtering

Dell PowerConnect 55xx Systems User Guide 125
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Contax\CxU_Switching_NetworkSecurity.fm
DELL CONFIDENTIAL – PRELIMINARY 9/11/12 - FOR PROOF ONLY
Proprietary Protocol Filtering
Protocol filters are used to disallow receiving specific proprietary protocol
packets through an interface. These can be enabled for specific ports.
If a protocol filter is enabled on a port, you cannot enable a QoS ACL on this
port.
To configure Proprietary Protocol Filtering:
1
Click Switching > Network Security > Proprietary Protocol Filtering to
display the
Proprietary Protocol Filtering: Summary page.
Figure 8-9. Proprietary Protocol Filtering: Summary
A list of the ports and their filtered protocols is displayed.
2 Click Edit to modify the filtered protocols for a specific port.
3 Select a unit and an interface.