Dell POWERCONNECT 5548P - Global Settings

Dell PowerConnect 55xx Systems User Guide 563
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Contax\CxUGSwitching_ARP.fm
DELL CONFIDENTIAL – PRELIMINARY 9/11/12 - FOR PROOF ONLY
Global Settings
To enable ARP inspection on the device:
1
Click Switching > Dynamic ARP Inspection > Global Settings in the
tree view to display the
Global Settings page.
Figure 18-1. Global Settings
2 Enter the fields:
•
Enable ARP Inspection — Enable/disable ARP inspection.
•
ARP Inspection Validate — Enable/disable the following checking
source MAC address, destination MAC address and IP addresses
against the respective addresses in the ARP body.
•
Minimal Syslog Interval (0 – 86400) — Enter the minimum time
interval between successive ARP SYSLOG messages.