Dell POWERCONNECT 5548P - LAG Configuration

410 Dell PowerConnect 55xx Systems User Guide
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Contax\CxUGSwitching_Ports.fm
DELL CONFIDENTIAL – PRELIMINARY 9/11/12 - FOR PROOF ONLY
LAG Configuration
Use the LAG Configuration pages to configure LAGs. The device supports
up to 32 LAGs per system, meaning for all units in the stack. For information
about Link Aggregated Groups (LAGs) and assigning ports to LAGs, see
"Link Aggregation" on page 509.
To configure LAGs:
1
Click Switching > Ports > LAG Configuration in the tree view to display
the
LAG Configuration: Summary page.
Figure 10-6. LAG Configuration: Summary
The LAG parameters are displayed.
2 To configure a LAG, click Edit .
3 Select the LAG and enter the fields:
–
LAG Mode — Select the LAG mode. The possible options are: