Dell POWERCONNECT 5548P - LAGs Settings

482 Dell PowerConnect 55xx Systems User Guide
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Contax\CxUGSwitching_VLAN.fm
DELL CONFIDENTIAL – PRELIMINARY 9/11/12 - FOR PROOF ONLY
LAGs Settings
VLANs can either be composed of individual ports or of LAGs. Untagged
packets entering the device are tagged with the LAGs ID specified by the
PVID.
To configure LAGS on a VLAN:
1
Click Switching > VLAN > LAG Settings in the tree view to display the
VLAN LAG Settings page.
Figure 14-4. VLAN LAG Settings
All LAGs and their settings are displayed.
2 To modify the LAG settings, click Edit , and enter the fields:
–
LAG — Select the LAG to be modified.
–
Switchport Mode — Select whether the LAG is in Layer 2 or Layer 3.
If the LAG is in Layer 2, enter the parameters described below,
otherwise the fields are not relevant.