Dell POWERCONNECT 5548P User Manual

Dell PowerConnect 55xx Systems User Guide 13
DELL CONFIDENTIAL – PRELIMINARY 9/11/12 - FOR PROOF ONLY
1
Preface
PowerConnect 5524/5548 and PowerConnect 5524P/5548P are stackable,
advanced multi-layer devices.
This guide contains the information needed for installing, configuring, and
maintaining the device through the web-based management system, called
the OpenManage Switch Administrator.
This guide describes how to configure each system through the web-based
management system and through CLI commands.
The
CLI Reference Guide, which is available on the Documentation CD,
provides additional information about the CLI commands.

Dell POWERCONNECT 5548P Specifications

General

Model	PowerConnect 5548P
Power Over Ethernet (PoE)	Yes
Switching Capacity	176 Gbps
Power	AC 120/230 V (50/60 Hz)
Humidity	10% to 90% non-condensing
Type	Switch
Device Type	Switch
Enclosure Type	Rack-mountable
Ports	48 x 10/100/1000
MAC Address Table Size	16K
Routing Protocol	Static
Remote Management Protocol	SNMP
Features	Flow control, VLAN support, IGMP snooping, port mirroring, DHCP support, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at
Jumbo Frame Support	9216 bytes
Power Supply	Internal power supply
Operating Temperature	0 to 45 °C
Storage Temperature	-40 to 70°C
Management	Web based, CLI, SNMP