Dell POWERCONNECT 5548P - Back Panel

Dell PowerConnect 55xx Systems User Guide 39
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Contax\CxUGHardware.fm
DELL CONFIDENTIAL – PRELIMINARY 9/11/12 - FOR PROOF ONLY
The Reset button does not extend beyond the unit’s front, and it must be
activated with a pin.
Back Panel
The back panel of the non-PoE models, shown in Figure 3-3, contains a
Redundant Power Supply (RPS) connector, Location LED, and power
connector.
The back panel of the PoE models, shown in Figure 3-4, contains a Modular
Power Supply (MPS) connector, Location LED, power connector, and two fan
outlets.
Figure 3-3. PowerConnect 5524/48 Back Panel
Figure 3-4. PowerConnect 5524/48/P Back Panel
The elements on the back panel are used as follows:
• Locator LED — This LED is lit when the Unit Identification feature is
selected. See "Unit Identification (Location)" on page 374 for more
information about this feature.
•
RPS/MPS — Connector for auxiliary power supply. See "Power Supplies "
on page 44
for more information.
RPS
A/C Power Supply
Locator
Locator
MPS
A/C Power Supply
FanFan